-
Filter membrane
Spilltex is a highly efficient oleophobic and superhydrophilic membrane combining natural cotton fabric modified with a specialised microgel coating derived from polysaccharides. -
Specs
Surface density: 170-260 g/m²
Colour: white, blue, light green
Separation efficiency: up to 99.9 %
Residual oil in water level: up to 5 ppm
Water flux permeability: 15,000-30,000 L/(m2h)
Concentration of hydrocarbon in water: 10-5000 mg/l
Temperatures: 0 to +85°C
pH: 2-8
Colour: white, blue, light green
Separation efficiency: up to 99.9 %
Residual oil in water level: up to 5 ppm
Water flux permeability: 15,000-30,000 L/(m2h)
Concentration of hydrocarbon in water: 10-5000 mg/l
Temperatures: 0 to +85°C
pH: 2-8
Application
- separators and coalescers;
- industrial oil and grease traps;
- wastewater treatment solutions;
- skimmers and other products in Oil Spill Response industry;
- stormwater management.
- industrial oil and grease traps;
- wastewater treatment solutions;
- skimmers and other products in Oil Spill Response industry;
- stormwater management.
Key features
Can be supplied in different sizes, shapes and forms, as well as reinforced for special needs
High water flux permeability: 15,000-30,000 L/(m2h) — more than 4 times higher than that for similar textile membranes
Residual oil in water level – up to 5 mg/L
Wide operating range: Initial concentration
of hydrocarbon in water 10-5000 mg/l,
temperatures: 0 to +85°C, pH: 2-8
of hydrocarbon in water 10-5000 mg/l,
temperatures: 0 to +85°C, pH: 2-8
Petroleum products and oils do not stick
and can be easily removed from the fabric surface
and can be easily removed from the fabric surface
Allows water to pass through while retaining hydrocarbon (holds up to 10 cm of oil on the surface)
How to use
To activate the Spilltex® membrane, immerse it in water for 5–15 minutes. This process is essential for forming a gel that enhances the membrane's hydrophilic properties.